HIGH-SPEED TOP-ENTRY INDUSTRIAL MIXERS
AN DIRECT-DRIVE MIXERS
TOP-ENTRY FLANGE MOUNT MIXERS FOR OPEN TANKS AT ATMOSPHERIC PRESSURE. WITH COMPLETELY CANTILEVERED SHAFT. CUSTOM-MADE LENGTHS TO SUIT THE DEPTH OF THE TANK.
- Corrosion-resistant industrial mixers.
- Vigorous mixing (with no gear reducer).
- 4-6-8-pole electric motors.
- Reversible marine propellers.
- Mixer materials: PP, PVC, PVDF, INOX.
- Propeller materials: PP, PVC, PVDF, INOX.
- Cantilevered shaft coupled directly to the motor.
- Custom-made lengths between 150 and 1500 mm
PLASTIC VERSION (PP – PVC – PVDF)
| kW | Poles | rpm 50 Hz | Ø impeller | Lengths mm | Datasheet | |||
|---|---|---|---|---|---|---|---|---|
| min | max 50Hz - 60Hz | |||||||
| AN05 | 0.09 | 4 | 1450 | 50 mm | 150 | 700 - 600 |  |
|
| AN07 | 0.09 | 4 | 1450 | 70 mm | 150 | 700 - 600 | |
|
| AN10 | 0.12 - 0.18 | 4 | 1450 | 95 mm | 250 | 700 - 600 | |
|
| AN10 | 0.12 | 6 | 950 | 95 mm | 250 | 850 - 800 | |
|
| AN20 | 0.25 - 0.37 | 4 | 1450 | 112 mm | 250 | 800 - 700 | |
|
| AN20 | 0.18 - 0.25 | 6 | 950 | 112 mm | 250 | 1000 - 900 | |
|
| AN30 | 0.55 - 0.75 | 4 | 1450 | 132 mm | 250 | 750 - 650 | |
|
| AN30 | 0.37 - 0.55 | 6 | 950 | 132 mm | 250 | 950 - 850 | |
|
| AN30 | 0.18 - 0.25 | 8 | 700 | 132 mm | 250 | 1100 - 1000 | |
|
| AN40 | 1.1 - 1.5 | 4 | 1450 | 150 mm | 250 | 1000 - 900 | |
|
| AN40 | 0.75 - 1.1 | 6 | 950 | 150 mm | 250 | 1200 - 1100 | |
|
| AN40 | 0.37 - 0.55 | 8 | 700 | 150 mm | 250 | 1500 - 1300 | |
|
We also supply special custom-made mixers. Please contact our technical department for any special requirements.
METAL VERSION (AISI 304)
| kW | Poles | rpm 50 Hz | Ø impeller | Lengths mm | Datasheet | |||
|---|---|---|---|---|---|---|---|---|
| min | max 50Mz - 60Mz | |||||||
| AN10 SS | 0.12 - 0.18 | 4 | 1450 | 95 mm | 150 | 650 - 600 | |
|
| AN10 SS | 0.12 | 6 | 950 | 95 mm | 150 | 800 - 750 | |
|
| AN20 SS | 0.25 - 0.37 | 4 | 1450 | 112 mm | 200 | 850 - 750 | |
|
| AN20 SS | 0.18 - 0.25 | 6 | 950 | 112 mm | 200 | 900 - 850 | |
|
| AN30 SS | 0.55 - 0.75 | 4 | 1450 | 132 mm | 250 | 850 - 750 | |
|
| AN30 SS | 0.37 - 0.55 | 6 | 950 | 132 mm | 250 | 1000 - 900 | |
|
| AN30 SS | 0.18 - 0.25 | 8 | 700 | 132 mm | 250 | 1100 - 1050 | |
|
| AN40 SS | 1.1 - 1.5 | 4 | 1450 | 150 mm | 300 | 900 - 800 | |
|
| AN40 SS | 0.75 - 1.1 | 6 | 950 | 150 mm | 300 | 1100 - 1000 | |
|
| AN40 SS | 0.37 - 0.55 | 8 | 700 | 150 mm | 300 | 1250 - 1150 | |
|
| AN50 SS | 4 | 4 | 1450 | 200 mm | 350 | 1000 - 900 | |
|
| AN50 SS | 1.5 - 2.2 | 6 | 950 | 200 mm | 350 | 1200 - 1100 | |
|
| AN50 SS | 0.75 - 1.5 | 8 | 700 | 200 mm | 350 | 1400 - 1300 | |
|
We also supply special custom-made mixers. Please contact our technical department for any special requirements.
download area
TECHNICAL CHARACTERISTICS
DIRECT DRIVE MIXERS
Direct drive industrial mixers for fluids with medium-low viscosity. They are particularly suitable for fast mixing processes, liquid-solid mixing and mixing liquids with solids in suspension.
CUSTOM-MADE LENGTHS
Top-entry plate mount mixers. Stirrers with fully cantilevered bare shaft connected directly to the motor. Construction lengths from 150 to 1500 mm depending on the depth of the tank.
RAPID MIXING
High-speed mixers for use in medium-small tanks. Used in the purification and neutralisation of water, in the treatment of acid fumes, in fertigation processes, in preparing solutions from powder or liquid and in mixing chlorine in granules.
3-BLADE IMPELLER
With a three-blade marine propeller with no metal inserts, insensitive to the direction of rotation. It is possible to obtain downward or upward flows by simply inverting the motor’s direction of rotation.
TECHNICAL CHARACTERISTICS
DIRECT DRIVE MIXERS
Direct drive industrial mixers for fluids with medium-low viscosity. They are particularly suitable for fast mixing processes, liquid-solid mixing and mixing liquids with solids in suspension.
CUSTOM-MADE LENGTHS
Top-entry plate mount mixers. Stirrers with fully cantilevered bare shaft connected directly to the motor. Construction lengths from 150 to 1500 mm depending on the depth of the tank.
RAPID MIXING
High-speed mixers for use in medium-small tanks. Used in the purification and neutralisation of water, in the treatment of acid fumes, in fertigation processes, in preparing solutions from powder or liquid and in mixing chlorine in granules.
3-BLADE IMPELLER
With a three-blade marine propeller with no metal inserts, insensitive to the direction of rotation. It is possible to obtain downward or upward flows by simply inverting the motor’s direction of rotation.
ALSO AVAILABLE IN METAL
AN top mount mixers are also available in a metal version with no support flange. In this variant, all wetted parts (shaft and impeller) are made of stainless steel (AISI 304). Typical applications (liquids that are not highly corrosive): wastewater treatment, production of biogas, mixing of additives and reagents, preparation of slaked lime, water flocculation, agitation of pigments and dyes, mixing of chlorine solutions, mixing of fertilisers and manures.
CONSTRUCTION MATERIALS
PP
The most widely used
anti-acid plastic polymer for use in corrosive environments. It offers good resistance to most acid and alkaline solutions and can be used, depending on the concentration of the aggressive liquids, up to a temperature of 80°C.
PVC
Plastic material with excellent resistance to acids, bases, saline solutions and organic compounds. PVC is generally used when treating sodium hypochlorite (NaClO).
At low temperatures it becomes fragile. The operating temperature is between 40 and 60°C.
PVDF
Thermoplastic with exceptional resistance to corrosion and temperature. PVDF covers a wide range of uses but
is ideal for highly concentrated acids.It is not suitable for certain inorganic bases, such as caustic soda. Operating temperature: max. 100°C
AISI 304
AN mixers are also available in stainless steel. This version can be used to mix industrial liquids that are not particularly aggressive, such as: fertilisers, manures, quenching treatments, wastewater, graphite suspensions, mineral oils. Maximum operating temperature: approx. 100°C
EXAMPLES OF APPLICATIONS
- Acidification and neutralisation of water
- Fertigation systems
- Dissolution of salts in liquids
- Denitrification processes
- Preparation of polyelectrolyte solutions
- Chlorination systems
- Preparation of chemical reagents
EXAMPLE OF
CHEMICAL PRODUCTS
- Nitric acid
- Phosphoric acid
- Hydrochloric acid
- Chlorine and derivatives
- Sulphuric acid
- Nitrogen, phosphorus, potassium
- Nitrate, phosphate, sulphate
EXAMPLES OF APPLICATIONS
- Acidification and neutralisation of water
- Fertigation systems
- Dissolution of salts in liquids
- Denitrification processes
- Preparation of polyelectrolyte solutions
- Chlorination systems
- Preparation of chemical reagents
EXAMPLE OF
CHEMICAL PRODUCTS
- Nitric acid
- Phosphoric acid
- Hydrochloric acid
- Chlorine and derivatives
- Sulphuric acid
- Nitrogen, phosphorus, potassium
- Nitrate, phosphate, sulphate
OPTIONS THAT MAKE A DIFFERENCE
CUSTOM-MADE FLANGE
The PVC support plates of our industrial mixers are also available in custom-made shapes and sizes. Only AN05 and AN07 thermoplastic mixers (the two smallest models in the Plastic Series) and the entire AN SS metal range (stainless steel mixers) require no flange coupling, being directly keyed to the motor flange.
FRAMES AND TANKS
AN top entering mixers can be mounted inside tanks of varying capacity, turning them into mixing units or production stations. These mixing stations can be equipped with various optional features, including: metal frames, (fixed version) metal frames with wheels (mobile version), electrical panels, drainage valves, containment tanks.
AN30 MIXER FOR IBC
This Range of corrosion-resistant mixers comes with a particular option for mounting onto storage tanks and tote tanks. The AN30 model adapts perfectly to typical caged containers (IBC) thanks to a metal support with quick release toggle clamps. The steel mounting frame is designed with forklifts truck brackets.
HOW TO CHOOSE A MIXER
In order to size a specific mixer and ensure effective mixing, it is necessary to evaluate several variables which often interact with each other: the type of liquid (or liquids) to be mixed, the volume to be handled, the purpose of the process, the geometry of the container, the position of the mixer. In this preliminary operation, the manufacturer’s experience is always a decisive added value, given the changing conditions that frequently affect industrial processes and liquids.
DO YOU HAVE A REQUEST ?
TALK TO OUR EXPERTS
SUBMIT YOUR ENQUIRY
LATEST INDUSTRIAL MIXERS SUPPLIES
PVDF INDUSTRIAL CHEMICAL MIXER
Corrosion resistant plastic mixer with 250 mm shaft. For mixing water, coagulants and ferric chloride.
HIGH SPEED PLASTIC MIXER
Direct drive flange mount industrial mixer manufactured in polypropylene with a PVC base plate.
HIGH SPEED METAL MIXER
Mixer for keeping particulate from settling to the tank bottom. With bung adapter to screw it directly into the drum’s nozzle.
DISSOLVING CHLORINE GRANULES
Mixer made from PP with marine style propeller and direct-drive shaft. For dissolving chlorine granules in water.
KEEPING SOLIDS IN SUSPENSION
AN20 top entry plate mount industrial agitator for keeping particulate from settling to the tank bottom.
CORROSION RESISTANT MIXERS
Chemically resistant mixers with non metallic wetted components. Construction material: polypropylene.
HOMOGENEOUS SOLUTIONS
PVDF direct-drive mixers to homogenize a corrosive solution of demineralized water, hydrochloric acid and nitric acid.
ACIDIC WASTEWATERS
Custom designed anti acid mixers with extremely intense agitation fpr mixing miscible corrosive liquids.
WATER CHLORINATION PROCESS
High speed top mounted industrial agitators in PVC for agitating water and sodium hypochlorite at 30°C.
PLASTIC MIXERS FOR FERTIGATION
Top-entry mixers for fertigation system for mixing water with fertilizers (nitrogen, phosphorus, potassium).
FURTHER INDUSTRIAL MIXERS
AP SERIES
PUMPING MIXERS
AR SERIES
SLOW-SPEED MIXERS
AG SERIES
SUPPORTED MIXERS
AL SERIES
HEAVY-DUTY MIXERS
IBC SERIES
TOTE TANK MIXERS
DS SERIES
MIXING UNITS
AGITATOR+TANK
